Laporkan Masalah

PENENTUAN KEMUDAHAN PADA PROSES PERMESINAN ELECTRICAL DISCHARGE MACHINING

NIDIA LESTARI, Muslim Mahardika, S.T., M.Eng., Ph.D

2014 | Tesis | S2 Teknik Mesin

Material dapat dibentuk untuk berbagai keperluan, diantaranya antariksa, otomotif, biomedis, elektronik, lingkungan, dan militer. Pemilihan teknologi permesinan (machining process) yang tepat akan menghasilkan raw material yang sesuai dengan bentuk yang diinginkan. Electrical Discharge Machining (EDM) sebagai salah satu jenis mesin non-konvensional terkenal dengan kemampuannya untuk membuat bentuk kompleks pada logam-logam yang sangat keras. EDM juga bisa digunakan untuk memproses produk dengan ukuran yang sangat kecil (micro machining). Kemudahan proses EDM ditentukan oleh teori    . Dalam penelitian ini dikembangkan metode pendekatan antara energi yang dibutuhkan selama machining process terhadap variabel λ, θ, dan ρ sehingga dihasilkan forecast model (formula) yang bisa dijadikan prediksi awal material benda kerja yang akan lebih mudah diproses dengan EDM. Ada dua metode yang digunakan untuk membentuk formula tersebut, yaitu analisis dimensi teorema π Buckingham dan operasi aljabar logaritma. Formula yang terpilih dalam penelitian ini dibentuk dari metode operasi aljabar logaritma dengan R2 sebesar 0.7477 yang menunjukkan bahwa persentase pengaruh formula terhadap prediksi nilai total energy of discharge pulses (Et) sebesar 74,77% dan MAPE formula terhadap prediksi nilai total energy of discharge pulses (Et) bernilai 30.32%. Material dengan nilai terkecil yang dihasilkan oleh formula 0,2156 0,7 0,2537 E    merupakan material benda kerja yang diprediksi lebih mudah di-machining sehingga dapat ditentukan pasangan electrode yang sesuai. Pasangan electrode yang sesuai akan meminimalisir energi yang dibutuhkan selama permesinan dan keausan tool electrode.

All materials in the world could be formed and applied in many fields, such as aerospace, automotive, electronics, environment, and military industries. Selecting the right machining process technology will produce the suitable shape of raw material required. Electrical Discharge Machining (EDM) as one of nonconventional machine has been known by its ability in machining many complex 3D shapes even for high hardness metal. This machine could also process work piece with small size (micro machining). The ease of machining a work piece by Electrical Discharge Machining (EDM) processes is determined by    theory. A method in order to obtain the forecast model which can be used as initial prediction that made the EDM process easier by using an approach between the required energy during machining process and λ, θ, and ρ variables has been developed in this research. There are two methods used for establishing the formula: dimensional analysis of Buckingham π theorem and Logarithm-Algebra Operations. The formula chosen in this investigation is generated by Logarithm-Algebra Operations which has R2 value of 0.7477. This result shows that the percentage of formula effect on value of total energy of discharge pulses (Et) predicted is 74.77% and the effect of Mean Absolute Percentage Error (MAPE) formula on value of total energy of discharge pulses (Et) predicted is 30.32%. Material which has the lowest value calculated using 0,2156 0,7 0,2537 E    formula is the material that is predicted will be the easiest to be machined so that the suitable electrodes could be determined. The suitable electrodes will reduce the energy needed during machining and the tool electrode wear

Kata Kunci : kemudahan proses EDM, forecast model, EDM


    Tidak tersedia file untuk ditampilkan ke publik.